Loba Easy Finish is a one-component water-based finish for hardwood floors. The polyurethane-acrylate formula gives excellent wear resistance without a hardener, so there is no mixing, no pot life and no waste. Loba recommends it for high-traffic residential and light commercial floors.
At a glance
- One component – no mixing, no pot life, no waste.
- Easy to use – no foaming or lap marks.
- Non-yellowing – with excellent build from a high solids content.
- Coverage – 500–600 sq ft per gallon per coat.
- Recoat – after 2–3 hours at the earliest.
- Cure – 90% after 24 hours; fully cured after 5 days.
- Sheens – satin, semi-gloss and gloss.
How to apply
- Prime the sanded floor with Loba EasyPrime.
- Apply 2 coats with a Loba Micro 120 Roller or T-bar. Untreated natural cork takes 3 coats.
- Recoat after 2–3 hours. Sand between coats with a 180–220 grit perforated pad.
Do not apply below 55°F (13°C); Loba recommends 55–80°F and 40–75% relative humidity. Do not thin or add water. For professional use.
Where to use it
On wood and cork floors in high-traffic residential and light commercial areas. Do not use it on floors with a UV-cured, oxide-containing factory finish.
Frequently asked questions
How much water-based finish do I need?
One gallon covers 500–600 sq ft per coat. Two coats on a 1,000 sq ft floor takes about 4 gallons.
Easy Finish or a two-component finish?
Easy Finish is the simple, one-component choice for homes and light commercial floors. For high-traffic commercial floors, step up to Loba 2K Duo or 2K Invisible Protect.
Goes with
Shipping: free shipping on eligible orders over $75 in the contiguous US (California excluded). Orders usually process in 1–2 business days. See the shipping policy for details.
