PALLMANN PALL-X POWER is a one-component waterborne finish for wood floors in residential and high-wear commercial spaces. It goes on milky, dries clear and does not amber. It is sold by the gallon in satin, semi-gloss, gloss and matte (Pallmann calls the matte sheen Ultra Matte).
Key features
- One component – no hardener to mix and less leftover waste.
- 4-day cure – fully cured after about 4 days.
- Clear, non-ambering – not UV sensitive.
- Indoor air quality – SCS Indoor Advantage Gold certified, VOC under 200 g/L.
- System compatible – works with other Pallmann sealers and finishes and may be used with PALL-X BOND.
How to use
- Pallmann recommends a three-coat system: one coat of Pallmann sealer, such as Pallmann X-Clear, then two coats of finish.
- The finish may go directly over stain, but Pallmann advises a sealer over stain first.
- Shake the container hard for one minute. Do not thin it or add water.
- Apply with a T-bar, waterborne roller, brush or cut-in pad, holding 450–500 sq ft per gallon.
- Abrade between coats with a 120–180 grit screen or sanding strips. Do not go finer than 180 grit.
- Clean tools with water.
Dry and cure times
- Walk on: after about 2–3 hours
- Abrasion between coats: after 3–4 hours
- Full cure: about 4 days. Do not use cleaner on the floor during that time.
Specifications
- Brand: Pallmann
- Size: 1 US gallon (3.78 L) plastic container
- Sheen levels: ultra matte 10 GU, satin 22 GU, semi-gloss 33 GU, gloss 65 GU
- Pallmann item numbers: satin 81646, semi-gloss 83726, gloss 83527, ultra matte 83526
- Coverage: about 450–500 sq ft per gallon
- Solids: 37% (satin)
- Application temperature: 65–75°F
- Shelf life: at least 18 months, stored at 50–70°F
