PALLMANN PALL-X GOLD is a two-component waterborne finish for sanded wood floors that see heavy residential or commercial traffic. Each set is a container of finish (Component A) plus a bottle of hardener (Component B), making about one gallon mixed. It is offered here in satin and matte.
Key features
- Two-component formula – a hardener is added for durability and chemical resistance.
- 3-day cure – fully cured after about 3 days.
- Clear, non-ambering – milky when wet, clear when dry and not UV sensitive.
- Radiant heat – Pallmann lists it for floors over radiant heating systems.
- Indoor air quality – SCS Indoor Advantage Gold certified, VOC under 170 g/L.
Mixing and pot life
- Mix ratio 10:1. One bottle of hardener activates one container of finish.
- Shake Component A for 30 seconds, add Component B and shake right away for another 60 seconds.
- Let the mix sit for 5 minutes before applying.
- Pot life is up to 4 hours once the hardener is in.
- Do not thin it or add water.
How to use
- Pallmann recommends one coat of Pallmann sealer, such as Pallmann X-Clear, then two coats of finish. A third finish coat is advised for heavy traffic.
- Apply with a T-bar, cut-in pad, Pallmann waterborne roller or brush at 450–500 sq ft per gallon.
- Recoat without abrading if less than 24 hours have passed. After 24 hours, abrade with 120–180 grit and no finer.
- Clean tools with water.
Dry and cure times
- Foot traffic: after 3–4 hours
- Hot coat: after 4–5 hours
- Abrasion: after 5 hours
- Full cure: about 3 days. Do not use cleaner on the floor during that time.
Specifications
- Brand: Pallmann
- Size: Component A 0.91 US gal plus Component B 0.09 US gal
- Sheen levels: matte 14 GU, satin 24 GU
- Pallmann item numbers: satin A/B 163132, matte A/B 163134
- Solids: 36% (satin)
- Application temperature: 65–75°F
- Shelf life: Component A at least 18 months, Component B at least 12 months, stored at 50–70°F